Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Workstands

Park Tool Replacement Clamp Covers
$16.99 - $35.99
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Park Tool Tool Tray Collar
$21.99
Park Tool's Tool Tray Collar easily adapts the #106 Work Tray to fit the 41mm upright tube on 2011 and older PRS-20 and PRS-21 Repair Stands, as well as 1996 and newer PCS-1, PCS-4, PCS-4-1 and PCS-4-2 Repair Stands (each sold separately).
Park Tool Work Tray
$24.99
Park's Work Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools and small parts close at hand. It has deep sides so your small items stay put and many slots for holding your tools. The Tool Tray fits Park's PRS-2, PRS-3, PRS-6, PRS-11, PRS-12, PCS-1 and PCS-4 repair stands.
Super B Sliding Thru-Axle Adaptor
$24.99
- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks
49°N Bike Support Stand
$29.99
Supports bikes at the seat and chain stays - Lifts rear wheel to allow maintenance and repair of drive-train - Adjustable hook height and angle - Stable wide footprint
Park Tool RPP-1 Repair Stand Post Protector
$29.99
The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease. - Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3 - Easily removed and installed with hook-and-loop material
Topeak PrepStand Pro Upgrade Kit
$29.99
The PrepStand Pro Upgrade Kit makes measurement simple. It features a tray for weighing small parts and a hook for weighing larger items. This is a great upgrade for your Topeak PrepStand Pro.
Topeak PrepStation Tool Tray
$44.99
Topeak's PrepStation Tool Tray attaches to their PrepStand repair stand (sold separately) to keep tools and small parts close at hand for maximum convenience. It's made of light and durable plastic with a padded bottom to hold tools in place, and it rotates for optimum accessibility.
Park Tool Travel and Storage Bag for PRS-15
$51.99
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Professional Race Stand. It makes travel easy and convenient, while also protecting your stand.
Park Tool Team Issue Repair Stand Extension
$52.99
A 6-inch (15cm) extension that easily mounts to the main beam of any PRS-22 or PRS-22.2 to accommodate longer wheelbase bikes with bottom bracket-to-front axle lengths over 28.75 inches, including CX, gravel and enduro style bikes.
Topeak PrepStand Tool Tray w/Lid
$54.99
Topeak's PrepStand Tool Tray attaches to their PrepStand repair stand (sold separately) to keep tools and small parts close at hand and has divided compartments for maximum convenience. It's made of durable plastic and it rotates for optimum accessibility. It also has a translucent lid so nothing falls out and you can see what's inside without opening it.
Park Tool Floor Mounting Plate
$56.99
Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.
Pro Bottom Bracket Stand
$58.99
If your bike has a hollow bottom bracket, the Pro Bottom Bracket stand makes it easy and convenient to do maintenance work. This stands folds up for easy storage when not in use. - Compatible with Hollowtech 2 bottom brackets - Coated alloy - Anti-slip base
Topeak PrepStand Magnetic Tool Tray
$64.99
Topeak's PrepStand Magnetic Tool Tray is a sturdy plastic tray with a magnetic metal bottom to keep steel tools and small parts close at hand for maximum convenience. It has a folding handle for portability and that also allows it to fit in Topeak's PrepStation (sold separately).
Park Tool Work Tray
$65.99
Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.
Park Tool Portable Wheel Dishing Tool
$71.99
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Portable Wheel Dishing Tool is a must. It disassembles quickly for storage or travel and allows you to easily check centering on road, mountain and BMX wheels from 24 to 29 inches in diameter and it works with any hub. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
Topeak FlashStand RX
$77.49
Designed for work on road bikes with tires up to 700 x 38C. The ultimate portable tune-up stand slips easily under the bottom bracket while the hook holds the down tube securely for display, storage and maintenance. - CLAMP HEAD: Bottom bracket support / Hook holds down tube - FOLDING: Yes - MATERIAL: Aluminum / Engineering grade polymer - MAX WEIGHT CAPACITY: 11 kg / 24.25 lb - COMPATIBILITY: Up to 700 x 38c - SIZE (folded): 19.4 x 8.7 x 6.5 cm / 7.6” x 3.4” x 2.5” - SIZE (open): 56 x 23.8 x 7 cm / 22” x 9.4” x 2.8” - 400 g / 14.11 oz
Park Tool PCS-EXT Extension Kit for PCS-1 Repair Stand
$81.99
The PCS-EXT is an extension for the older pre-2001 repair stands. The kit includes a quick-release collar and extension tube to raise the working height of the stand. The PCS-EXT is required for use of the 106-AC (sold separately).
Park Tool Cast Aluminum Tool Tray
$89.99
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2, PRS-3, PRS-6, PRS-13, PCS-1, PCS-1 and PCS-4 repair stands manufactured after June 1996 (stands sold separately).
Park Tool Wheel Alignment Gauge
$95.99
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
Topeak FlashStand MX
$109.99
Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance. - CLAMP HEAD: hollow spindle drive side crank - ADD FEATURE: Quick tool-free assembly - MATERIAL: Aluminum / Engineering grade polymer / Steel - MAX WEIGHT CAPACITY: 18 kg / 39.7 lb - COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm) - SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1” - SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15” - 1.8 kg / 3.97 lb
Topeak Weight Scale
$109.99
Weight freaks rejoice! Topeak's Weight Scale is the perfect addition to your PrepStand Pro or PrepStand Elite. It quickly and accurately measures anything from small parts all the way up to bikes and wheels.
Kuat Tri-Doc
$119.00
For anyone who doesn’t want to be confined to parking lots or trailheads — adventurers, racers, and garage mechanics — Küat designed the Tri-Doc for you. Tri-Doc offers an affordable way to turn your NV 2.0 into a travel stand. Reliable tri-leg design creates a stable platform for needed tune-ups or repairs. Aluminum construction finished with polished anodizing pairs perfectly with your NV 2.0. - Portable telescoping design - Quick setup - Pairs with your NV 2.0 Trail Doc - Anodized finish reflects NV 2.0 - Rubber feet offer additional stability and protection
Park Tool PRS-33 Electronics Upgrade Kit
$119.99
Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.
Topeak PrepStation Case Cover
$119.99
For extra protection of your favorite tools, Topeak's PrepStation Case Cover is made of 1000-denier nylon and EPE foam and slides perfectly over the PrepStation (sold separately). Even with it on, you can still unlock and extend the handle to move the case around quickly and easily.
Evo RS-1 Repair Stand
$130.99
- Home mechanic portable repair stand - Sturdy tubular steel design - Folding design for compact storage and mobility - Height adjustable from 36—72" (91—183cm) - V-Box clamping jaws with quick-dial closure (26.8mm+ tube diameters) - Detachable tool organizing tray - Maximum capacity: 55lb (25kg)
Park Tool Professional Micro-Adjust Repair Stand Clamp
$224.99 - $239.99
After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments
Park Tool PRS-33TT Tool Tray
$254.99
A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 Power Lift Repair Stand. The PRS-33TT solidly mounts directly to either side of the stand’s upright at any height. - 19 tool holding holes, slots and small trays in a variety of shapes and sizes - 14-inch (35cm) magnetic tool bar - Integrated mounting holes for PTH-1 Paper Towel Holder - Phone/tablet/clipboard holder - Pen and pencil holders - Adjustable utility hook to hang wheels, parts and scales - Height adjustable - Can be installed on a fully assembled stand
Park Tool PCS-12.2 Home Mechanic Bench Mount Repair Stand
$269.99
A bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand. Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal. - Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1-inch to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material - Narrow clamping jaws (2.7-inch/7cm) fit into tight areas or on short seat posts - 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs - All-steel structure for maximum stiffness and durability - Super strong glass-filled nylon-composite fittings and top tube internals enable smooth rotation and secure positioning - Mounts to any flat surface (mounting bolts not included) Distance from the center of the clamp to the center of the mount is approximately 11 3/4-inch (30cm). Height from bench to center of the clamp axis is approximately 9 7/8-inch (25cm). Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.
Park Tool Home Mechanic Wheel Truing Stand
$299.99
Park's Home Mechanic Wheel Truing Stand allows extremely accurate and reliable wheel truing and even building at an economical price. It's constructed from heavy-gauge steel and works with most wheel sizes and hub widths. It can be bolted to a bench for additional stability.
Page 1 of 2 Next page