Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Pair of EndCaps for Yakima CoreBar.
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Includes a single SKS key.
Chainstraps for a multitude of rear of car bike racks.
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
Rear wheel strap for Boa bike mount. Includes one strap.
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"
For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty
Horizontal MightyMounts are simple attachments that make gear-specific Yakima mounts compatible with most factory car rack systems. - Simple, economical way to attach Yakima mounts to your factory car rack system - Quick and easy installation. No tools required. - Sold in sets of 4 Product Specs: - Weight: 0.50 lbs. - Limited Lifetime Warranty
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris. Product Details: - Durable rubber strip protects gear and crossbars from the wear-and-tear of loading - 76" length can be easily trimmed to fit any bar width - Compatible with Yakima HD Bar and JetStream Crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 76.00in x W 1.12in x H 0.33in - Fully assembled
Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Make backing up your trailer a cinch with this 40" bright yellow fiberglass pole. This increases the visibility of the rear of your trailer for you and others on the road. Attaches to your trailer frame or crossbar easily. - 40" tall bright yellow fiberglass safety pole attaches to trailer - Makes trailer more visible at all times and is especially useful for backing up Product Specs: - Weight: 1.20 lbs. - Limited One Year Warranty
Page 1 of 3 Next page