Derailleurs

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

Shimano's Tiagra Front Derailleur provides quick shifting. The clear-coated aluminum body and plated-steel cage are extra durable so you can enjoy smooth shifts mile after mile.

Shimano's Deore XT Dyna-Sys 10-speed Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time. This model is specifically optimized for 2x10 set ups.

Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

- Bargain priced tensioner for turning a geared bike into a single speed - Fixed position aluminum arm with quiet rubber sealed bearing pulley - Mounts in place of derailleur

If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.

The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams

Shimano's Claris 8-Speed Rear Deraileur features smooth 11-tooth pulleys, a light-action spring, and a wide outer-pivot design that increases rigidity for precision shifts every time.

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time. This is an E-Type derailleur, meaning it mounts to the bottom bracket taking the guesswork out of derailleur mounting on full-suspension, carbon-fiber and non-standard frames.

Campagnolo's Super Record EPS Rear Derailleur's arresting beauty is entwined with the pinnacle in rear shifting accuracy and precision. Campagnolo uses an advanced-parallelogram design and the extremely high-quality servo motors for precise, fast shifting of up to all 11 gears from a single push of a button. Or stop on any cog and the position sensor makes micro-adjustments to ensure perfect alignment. And this top-tier Italian bike jewelry is constructed from carbon and cold-forged aluminum to create an ultra strong and extremely light derailleur. Plus, the pulleys roll on super-efficient ceramic bearings and are made from a special rubber that renders the drivetrain virtually silent.

- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs

Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time.

SRAM's Force Front Derailleur is made of light, yet rugged materials to shift like a champ mile after mile. It also lets you trim your shifting for flawless gear changes and it boasts easily accessed limit screws for simple adjustments. Plus, the Force shifts perfectly with both standard and compact cranksets.

Shimano's Dura-Ace Rear Derailleur boasts a light and reliable cold-forged-aluminum body with a carbon cage and a wide pivot design that boosts rigidity for smooth, speedy shifts. Fluorine-coated pivots minimize friction for nearly effortless shifting. And, the oversize sealed-bearing pulleys are silky smooth, ultra quiet, and keep out dirt and water. Plus, the 7900 accepts up to a 28-tooth cassette cog for even greater gearing possibilities.

Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Shimano's Dura-Ace Di2 Front Derailleur Braze-On Adapter is the correct mount for electronic Di2 derailleurs and their fast powerful servo motors.

Shimano's Deore XT Shadow Rear Derailleur is perfect for today's aggressive, all-mountain riding. The radical design means that the Shadow is super-low profile; it barely protrudes more than the quick release nut. Direct cable routing reduces the chance of the cable snagging on roots and rocks and fires off shifts super quick. A stronger spring keeps the body more stable when blasting through technical terrain at speed and yields a firm, crisp shifting feel. Plus, the redesigned bracket axle keeps the derailleur body from contacting your chainstay and reduces chatter so you just concentrate on the best line.

SRAM's X-7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.

SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams

SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.

Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load. This 38/36T maximum chainring size version is the one you want if you are running a low-range double-ring setup.