Front

The Dura-Ace Front Derailleur is Shimano's top-of-the-line front changer. The body is made of cold-forged aluminum for lightness with top-notch strength, and the pivots are extra wide for amazing shifting. The lightweight, replaceable aluminum cage is nickel plated for durability. Plus, the 7900 is designed to eliminate the need to trim the derailleur to prevent chain rubbing.

Shimano's Tiagra Front Derailleur provides quick shifting. The clear-coated aluminum body and plated-steel cage are extra durable so you can enjoy smooth shifts mile after mile.

Shimano's Deore XT Dyna-Sys 10-speed Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time. This model is specifically optimized for 2x10 set ups.

Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time. This is an E-Type derailleur, meaning it mounts to the bottom bracket taking the guesswork out of derailleur mounting on full-suspension, carbon-fiber and non-standard frames.

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time.

Shimano's Dura-Ace Di2 Front Derailleur Braze-On Adapter is the correct mount for electronic Di2 derailleurs and their fast powerful servo motors.

For quick, dependable shifting, look no further than Shimano's Sora Front Derailleur. Sora front derailleurs are compatible with dual-control road shifters and flat-bar style Rapidfire Plus shifters.

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

The Shimano Deore M618 series front derailleurs provide reliable, accurate 2x10 speed shifting. They are available in a variety of mounting formats to suit most mountain bike frames.

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69

Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

Shimano's Deore 10-Speed Front Derailleur sports a lightweight cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. This E-Type version mounts under your bottom bracket cup with a plate (sold separately).

Shimano's Deore 10-Speed Front Derailleur sports a lightweight cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. This E-Type version mounts under your bottom bracket cup with a plate (sold separately).

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and uses wide parallel pivots to provide fast, smooth, and reliable front shifting. This derailleur uses direct mounting and is specifically optimized for 2x10 set ups.

- More powerful shifting (+25% compared to M9000) - Reliable gear changes under load - Computer controlled auto trim - Optimized Di2 cage profile and gear tracking - Shimano Synchronized Shift compatible - Manual control avaiable (2nd shifter required) - System communication with rear derailleur - Advantage in all conditions - Modular mounting structure (adapters optional)

- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergnomical Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - New Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm

The Shimano Acera FD-T3000-2-TS3 front derailleur provides smooth, precise shifting for mountain bikes using a 2x9 speed drivetrain. - Precise and reliable shifting - Pre-assembled clamp band and inner cable fixing bolt - Smooth and accurate front shifting - Quick and easy installation - Total capacity: 16T

Designed for 2x9 speed drivetrains, the Shimano Altus front derailleur is HYPERDRIVE compatible. - Consistent off-road front shifting - One spec for 48.8mm & 51.8mm chainlines - Improved tire clearance - Precise and reliable shifting - Greater compatibility

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : E-Type