Parts & Accessories
Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Holds up to two water bottles behind the saddle for a more aerodynamic profile.
Specialized's Sitero Wing is the best way to carry water and inflation tools without compromising aerodynamics. Designed specifically for the Specialized Sitero saddle (sold separately), this handy accessory can be used with or without a bottle cage and holds a mini road pump and two CO2 canisters.
CamelBak's Fresh Reservoir Filter gets rid of bad taste with every sip. Its fast filtration speed means it won't impact flow rate, so you'll continually sip, or chug, crisp water. It easily clicks into any CamelBak bladder with the Quick Link system like the Antidote, or if you're using the Omega bladder, use the conversion kit (sold separately). And, you'll get up to 120 liters of filtration out of every Fresh Reservoir Filter.
Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands
Dry your reservoir quickly with the CamelBak Reservoir Dryer.
The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
Keep your tube close and hydration on-tap with the Magnetic Tube Trap.
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
Lezyne's Flow Caddy is a lightweight, rigid container that fits into any Lezyne and most other bottle cages, and serves as universal storage for a patch kit, multi-tool, extra tube, or phone. The Flow Caddy features a large opening which provides quick and easy access to contents and a secure screw-top. The labeled organizer secures and organizes your gear.
Specialized's Reserve Rack is the aero way to carry water and inflation tools on your bike. The Reserve Rack fastens to your saddle rails and allows you to mount a water bottle cage, mini pump, and two CO2 canister where they'll stay tucked out of the wind.
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.
$30.99 - $34.99
Stash it in your running vest, belt, or even in the palm of your hand. This lightweight, collapsible flask features our classic one-piece silicone bite valve for rapid hydration on race day, and packs down easily once it's empty. We designed the Quick Stow to fit easily in the front compartments of all of our running vests. Once it's empty, it folds down small enough to fit in your pocket. - Bite valve self-seals after each drink, eliminating annoying drips - Empty flask collapses and folds ultra-compact to fit in most pockets - All parts top-rack dishwasher safe - Volume indicators in ounces and milliliters for tracking hydration and adding electrolytes - Hang flask upside down for easy drainage and drying
Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade
This reservoir with Thermal Control insulation turns any pack into an all-season 100-ounce hydration system. Features: - The Crux Reservoir delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - 10mm closed cell foam reservoir insulation - Insulated tube and bite valve cover - Attachment points - Large adjustable carry loop
A replacement bite valve for your Quick Stow flask. The one-piece silicone design delivers rapid hydration and self-seals to eliminate annoying leaks and drips. Features - Patented one-piece silicone design - Bite valve self-seals to eliminate annoying drips - Fits only Quick Stow flasks - A great foldable and lightweight hydration accessory - Self-seals to eliminate annoying leaks and drips
The replacement Chute cap fits all CamelBak Chute, eddy and Groove vessels. The replacement Chute cap is a great option for when you need to convert your water bottle into a leak-proof container.
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
A solid aluminum seatpost mount providing an extra location for a water bottle cage on e-bikes or smaller frames. MATERIAL - Diecast aluminum DROPPER POST DIAMETER - Fits ø27.2 - ø31.6 mm (shims incl.) ADDED FEATURE - Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag SIZE - 13.6 x 6.2 x 4.6 cm / 5.4" x 2.4" x 1.8"
Alt-Position Cage Mounts provide an alternative way to raise or lower your water bottle cages when they are assembled on rear hydration devices for you to comfortably mount or dismount your bike. They also provide mounting location options for Topeak Ninja Bottle Cages and allow use of different Ninja bottle cage series combinations on smaller frames and tighter spaces. - Material: Aluminum - Compatibility: Topeak TRI-BackUp Elite series, Omni-BackUp Elite, Topeak Ninja bottle cage series - Size: 10.8 x 1.2 x 9cm / 4.3" x 0.5" x 3.5" - Weight: 25g / 0.88oz (1 pc w/ 4 bolts)
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
Upgrade your Tritan or Vacuum Insulated Stainless vessel with a new magnetic top in black or grey. Features: - Universal Cap: Compatible with Tritan and Vacuum Insulated Stainless - Easy Upgrade: Includes 1 Chute Mag Cap and 1 Chute Mag Cap tether - Dishwasher Safe: All parts are top-rack dishwasher safe - BPA, BPS & BPF Free: Taste your beverage, not the cap
The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
Page 1 of 2 Next page