Indoor Cycling

Replacement roller belt for Tacs roller trainers.

This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)

The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru-axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch

Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. The Kinetic Traxle comes in 3 thread pitches: - T-2101 Coarse: M12 x 1.75mm - T-2102 Medium: M12 x 1.5 - T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration

This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

These remote "sprint" shifter pods can be added to the tops of a standard road bar as climbing shifters or used with aero bar extensions for an additional shift position. Each pod has two buttons and can be configured via the Stages LINK app device manager. - Compatible with the StagesBike SB20 Smart Bike only - 350mm wiring harness length

- Quiet magnetic unit with 7 resistance levels activated by handlebar mounted thumb shifter - Handlebar mounted, 7-level thumb shifter, quickly mounts on handlebars from 22.2mm (7/8") up to 31.8mm (1 1/4") - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel - Heavy-duty, 100% steel, TIG welded frame with wide stance and tough powder coating that looks great and resists rust - Non–skid rubber adjustable leveling feet - Tough steel replacement quick-release skewer included - Accommodates most 24", 26", 700C, and 27" wheel/tire sizes

With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. HOW FAR AND HOW FAST Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps. FEATURES - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height 410 mm (16.1 in) - Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight 8.53 kg (18.8 lbs)

Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. The Boost bundle includes a speed sensor so you can track how far and how fast you're riding indoors and train with your favorite app. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. FEATURES - Type of trainer: Basic Smart trainer with magnetic brake - Virtual Power: Virtual Power - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height: 410 mm (16.1 in) - Dimensions when folded: 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight: 8.53 kg (18.8 lbs) DATA OUTPUT AND CONTROL - Wireless communication: ANT+ & Bluetooth - Control by: Handlebar resistance lever with 10 positions - Output: Speed - Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet - Trainer Type: Basic, Manual, Wheel-on, Wheel-on - Features: Smooth ride feel, Silent, Powerful, Manual resistance control, Enables virtual power, Handlebar lever, Dual material roll, Resistance roll 30 mm, Actual flywheel, Foldable, Easy to carry, Easy to set-up, Suitable for power workouts, Suitable for interval training - Positions: 10 - Suitable axles: Width of rear fork: Road 130 mm, MTB 135 mm. Adapters for other widths available

For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%

Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%

Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent then ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date. - Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1% - New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence - Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride - Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct-drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Main power optional Power indicator: Multicolor LED, Spot on floor Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750mm (22.6 × 29.5 in) Height: 550mm (21.7 in) Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2875 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%

This Revolutionary Smart bike trainer is designed to create an unprecedented, one of a kind, and immersive experience. It is equipped with vivacious features like Virtual shifting, Gear Feel, and descent simulation. It is, without question, the most innovative smart bike offering the most realistic cycling experience possible, and it is compatible with most popular applications like Tacx, TrainerRoad, and Zwift. Realistic, As it Should Be Simulating your outdoor ride indoors is what this Smart bike trainer is designed for. With Dynamic Inertia, Road feel, and Gear feel, the Tacx NEO Bike brings you the most realistic and smooth cycling feeling possible. Extremely Quiet The combination of NEO Smart technology and the internal design of the NEO Bike resulted in the most silent indoor bike trainer available. Incredibly Powerful Unmatched power. The NEO Bike is able to resist sprints up to 2200 watts and simulate climbs up to a 25% incline, making sure this trainer is able to deliver during the most intense training sessions. Accurate and Reliable The Tacx NEO Bike measures your power with incredible precision, making sure that your data is accurate and reliable. This Smart trainer is the only trainer that doesn't require a calibration process. It measures your power with a a maximum deviation of 1%. Dynamic Inertia Dynamic inertia is developed to control the mass inertia (ride feel) as realistically as possible. In contrast to the mass inertia of a flywheel, Dynamic inertia compensates for weight, speed, and angle of inclination. This ensures the most realistic and smooth ride feel. Customization Pedals, saddle, (tri)handlebar, bar tape, and crank lengths 4.5" Display Shows your data and allows for easy setup and manual control Control Buttons Change the setup or manually control the trainer 2 USB Chargers Power up your smartphone or tablet Plug In/Plug Out Choose to train with or without main power Isokinetic & Isotonic Train on a fixed speed or power level Interactive Air Fans The two air fans on the handlebars of the NEO Bike are interactive, the air flow will adjust to speed, power, or heart rate. The air flow can also be set at a constant speed. Realistic Virtual Shifting Like your road bike, the NEO Bike is able to shift gears. By pressing the up or down buttons on the shifters, you are able to change the gearing of your virtual drivetrain instantaneously. A clear display in the front shows which gear you're in. These virtual gears are customizable with the Tacx Utility App. Pedal Stroke Analysis The NEO Bike Smart measures the position of your left and right legs. This allows you to precisely measure and analyze your pedaling technique in order to develop a more effective pedal stroke. Road Feel & Gear Feel Experience the feeling of riding over cobblestones or shifting gears. The Road Feel and Gear Feel features simulate the vibrations of different road patterns, but also your virtual chain jumping into a different gear. This immersive feature is unique to the NEO trainer series and can be used with Tacx Films and Zwift. Descent Simulation At the top of a hill or mountain, there is always that exciting feeling of accelerating into a descent. Exactly that feeling is what this bike trainer gives you. The NEO Bike accelerates when on a descent. FEATURES Type of trainer: Smart bike with direct-drive and motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Main power optional Power indicator: Multicolor LED , Spot on floor Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Gear ratios: Chainrings: up to 3 sprockets, 22 – 53 teeth per sprocket. Rear cassette: up to 12 sprockets, 11 – 40 teeth per sprocket Q-factor: 147mm Supplied with: Fans, Tablet mount, Saddle, Handlebars, 2 USB chargers (front), Sweat cover, Ciro bottle cage, Bottle, Tacx towel, 1 month Tacx Premium software. Pedals and tablet sold separately SPECIFICATIONS Max. power (40 km/h): 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 1390 × 750mm (54.7 × 29.5 in) Height: 1170mm (46.1 in) Weight: 50 kg (110 lbs) Article number: T8000 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+ antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error tolerance: <1%

From the world leader in power, Stages Cycling brings the experience of riding outdoors to your home with the StagesBike. Designed by the indoor cycling experts with a fitness-studio-quality, Stages Indoor cycling frame provides unsurpassed stability and durability and a quiet, maintenance-free Gates Carbon belt drive for countless miles of trouble-free indoor riding. At the heart of the StagesBike is a smooth, silent, electronic resistance unit providing up to 2200 watts of stunningly realistic road feel, right down to each electronic gear change. An oversized flywheel makes climbing, acceleration and coasting feel spot on. Standard road bars and saddle are included—and both can be swapped for your personal favorites, including aero bars. StagesBike brake hoods incorporate electronic shift buttons and separate "sprint" buttons. Riders can customize the function of each button and choose between several virtual drivetrains, simulating a variety of popular bike setups. With functional brake levers and steering buttons, the StagesBike is ready for the evolution of indoor cycling. Precision power measurement comes from a Stages Gen 3 Dual-Sided power meter. Multiple Tour de France victories can't be wrong—this is the most reliable and accurate way to bring your watts to the world of Watopia and beyond. With micro-adjust saddle fore/aft adjustment and handlebar reach/stack with laser-etched sizing scales, adjustable brake hoods, and crank arm settings ranging from 165mm to 175mm, you can tune the StagesBike to precisely replicate the fit and feel of your favorite bike and get the most out of your indoor miles. The StagesBike is optimized for the most popular indoor cycling platforms including Zwift, Trainer Road, Sufferfest, and others, with ANT and Bluetooth connectivity for all control modes. Two USB charging ports keep your devices juiced up during your ride, and an integrated adjustable tablet holder makes it easy to see the action. - Bike Weight: 138lbs - Bike Dimensions: 62.2in x 22.2in x 46.7in - Drivetrain: CarbonGlyde featuring Gates Carbon Drive - Shifting: Configurable buttons—additional Sprint Shifters included + Ports for up to 2 additional shift locations - Frame: High-strength steel - Hardware: Stainless Steel - Flywheel: 50lbs - Connectivity: ANT+ and Bluetooth - Power: Stages Power LR—Dual-Sided Power - Accuracy: 1.5% - Max Power: 2200w @ 130RPM - Q-Factor: 157mm - Max Rider Weight: 300lbs - Rider Fit: 4'10"in—6'10"in - Two USB ports - Tablet & phone holder - Dual water bottle holders - Standard road bar (31.8 mm) with sprint shifters + Climbing and Aero shifters available for purchase - Compatible with Aero Bars + Aero shifters available for purchase - Compatible with four different crank lengths—165 mm, 170 mm, 172.5 mm, 175 mm (pedals not included) - Wireless Firmware Updates