Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

RockShox Maxle Ultimate Front Thru-Axle
$89.99 - $96.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Shimano In-Line Brake Cable Adjuster
$29.49
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Delta Stem Raiser
$54.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
SRAM Power Link Chain Connector
$5.99 - $24.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Eagle Chain Connector 12-Speed
$5.49
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$8.99
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
RockShox Reverb Top Cap Assembly A1/A2
$70.00
The Top Cap Assembly on your Reverb contains a dust wiper and bushing. These parts need to be in good shape for the continued smooth operation of your Reverb. This top cap includes the cap, dust wiper, and bushing. - Fits A1 and A2 generation seatposts - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Zipp CeramicSpeed Bearing Kit: For Sub-9/Super-9 Hub
$409.99
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
Bike Yoke Bike Yoke I-Spec EV Remote Adaptor
$25.50
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
SDG Tellis Collar Seal and Bushing Kit
$25.99
SDG Tellis dropper seatpost parts. - Seal, Collar, Bushing and Keyway
RockShox Maxle Stealth Rear Thru-Axle
$43.99 - $47.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
Wheels Manufacturing Inc. Flat Head Screw
$4.79 - $7.19
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Derailleur Hanger 78
$56.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
OneUp Components Dropper Post Remote - V2 - Shimano I-Spec II
$65.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
OneUp Components Dropper Post Remote - V2 - Shimano I-Spec EV
$65.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
TRP HD3.4 i-Spec II Shifter Adapter
$14.99 - $16.99
Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.
Cane Creek VALT Spring
$99.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Giant EnergyPak Cover, Dual Suspension
$119.99
- Downtube EnergyPak cover for Trance E+ and Intrigue E+.
Jagwire Sport Brake Housing
$2.00 - $37.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized
Chromag Spacer Kit
$17.50 - $18.50
- Made from 6061 alloy - Kit includes 3 spacers: 2x5mm and 1x10mm - CNC machined in Canada
ODI Lock-On Fork Bumpers
$24.99
- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
Wheels Manufacturing Inc. Derailleur Hanger 27
$30.60
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Evo Aluminum Headset Spacers
$1.50 - $13.99
- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube
Evo E-Force XL Seatpost Collar
$13.99
- CNC machined 6061-T6 alloy - Extra long 72mm clamping lever - Provides extra leverage - 13mm clamp height
Specialized Custom Snap-On Chainstay Protector
$18.00 - $20.00
- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal
Bike Yoke Bike Yoke Splits Clamp Handlebar Remote Adaptor
$10.50
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
Shimano 7- and 8-Speed Chain Pins
$14.49
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
Specialized Rear Rack Seat Collar
$25.00 - $30.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
SRAM X-Sync Pulley Assembly
$59.99
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Profile Design F-19 Lux Pads
$25.50
Profile Design's F-19 Lux Pads fit onto their F-19 armrests (sold separately) and provide additional comfort at a gossamer weight of only 26 grams per pair. Made of Lycra-covered, 21mm-thick EVA foam, these cushioned, supportive pads also sport Velcro straps for easy installation.
Wheels Manufacturing Inc. Wheels Growler Seat Binder Bolt
$15.00
- Machined aluminum ends with 50mm steel bolt
Wheels Manufacturing Inc. Derailleur Hanger 11
$37.60
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$0.05 - $24.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
KMC Half Link Adapter
$2.49 - $4.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Chromag NQR Seat Clamp
$31.00
- CNC machined aluminum seatpost clamp weighing in at 19g
Chromag Seat QR
$49.99
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
Wheels Manufacturing Inc. Derailleur Hanger 175
$51.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 chainring bolt
Wheels Manufacturing Inc. Derailleur Hanger 132
$64.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Trek Part #282088 Notes: - Post on this hanger is 20mm (.825) in length with an M12 x 1.75 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.
Wheels Manufacturing Inc. Derailleur Hanger 162
$43.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
SRAM Flat Mount Disc Caliper Bracket Bolts
$8.49 - $37.99
Flat Mount Disc Caliper Bracket Bolts
Jagwire Brake or Shift Cable Tips
$38.99 - $39.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Thomson Seatpost Collar
$49.99 - $58.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Wheels Manufacturing Inc. Derailleur Hanger 193
$46.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 66
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 87
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 268
$46.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (3) M3x8 Flat head screws included
Wheels Manufacturing Inc. Derailleur Hanger 102
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Jagwire Shimano Disc Brake Hose Needles
$21.99
Jagwire Disc Brake Hose Parts - For use only with Shimano branded hydraulic hose
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$7.99 - $18.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
FSA FSA Self Extracting Left Crank Arm Bolt for Carbon Mega Exo Road Cranks
$16.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers
Bike Yoke Bike Yoke I-Spec II Remote Adaptor
$30.00
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
Profile Design Subsonic Race 35a
$363.99
The Subsonic/Race/35a aerobar combines the low stack Subsonic bracket with the arm-hugging Race armrest to offer an industry-leading fit range oriented towards low, narrow positions. The 35a extension offers a comfortable 35 degree angle with a 80mm rise. This is the only low stack clip-on in the market that maintains the pad-to-grip angle as the bar is stacked up Subsonic is not just another aerobar bracket. It brings our next-generation fit range to a low stack bracket design. This allows the bar to use our riser kits to increase the stack without changing the relationship between the armrest and the grips. The Race armrest has been designed to tightly cup the riders arms – facilitating a narrow position and increasing control at speed. Performance - The Subsonic/Race is designed to achieve a lower stack height than standard aerobars, without the added frontal area of a below-the-basebar extension clamping system. This improves aerodynamics and the fit range. Fit Data - Armrest offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 142mm to 272mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: The minimum is 40mm and the bracket is compatible with our existing risers which add up to 70mm of stack in 5mm increments. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1200 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable low stack clip-on on the market. Origin Story After we released the Supersonic (J5) as a premium bracket with market leading fit options and verstility we wanted to bring the same kind of options to teh rest of our range of brackets and thus aerobars. Where our supersonic and Sonic brackets have a minimum stack of around 60mm, like most of the popular aerobars - we wanted the Subsonic to offer a substantially lower position. This helps the segment of the market who struggle to get into their ideal position with modern bike frames. And it was vital that we include stack height adjustment without altering the pad grip relationship - so our riders have the ability to fine-tune every aspect of their setup. The Race armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrest, smaller increments of movement are achieved - making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Additionally, there are two thicknesses of cushion available to ensure a snug fit for different sized arms. Who is it for - This bar is perfect for riders who wish to achieve lower positions than are possible with standard aerobar designs. Unlike other low stack bars, it allows fine-tuning of the stack height so the rider is not limited to only one armpad height. With the Race armrests fitted, it is tailored towards riders who intend to be low and narrow to punch the smallest possible hole through the wind. - Bracket: Subsonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Race / 5mm Pads - Extension Length: 350mm - Width: 142mm to 272mm - Weight: 590g
Profile Design T2+ Carbon Clip-on Aerobars
$549.99
Profile's T2+ Carbon Clip-on Aerobars feature carbon ergonomic S-bend extensions with 30mm of rise for lightness, durability, and a great fit. These clip-ons also boast Profile's F-35 anatomic armrests and their J4 brackets so that you have length, width and arm adjustments for easily achieving the perfect aero tuck.
Spank Headset Spacer Kit
$8.99
We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized
Lizard Skins Frame Shock Boot
$15.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
RockShox Remote Upgrade Kit - OneLoc
$104.99 - $139.99
The OneLoc remote from RockShox provides total control over your RockShox fork at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes, and RockShox's Reverb remote (all sold separately). Includes remote, cable and housing.
49°N Alloy Seat Clamp
$9.49
Forged Alloy seat-clamp.
Wheels Manufacturing Inc. Derailleur Hanger 230
$64.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
RockShox XLoc Full Sprint Remote
$239.00
This hydraulic lockout offers completely sealed and dependable fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
Zipp Vuka Clip Riser Kit
$37.99
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
Page 1 of 10 Next page