Parts & Accessories
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Floor pump nylon braided hose with ABS flip thread chuck and connectors, compatible with all standard pressure floor pumps.
Don’t leave home without it. Genuine Innovations' Tire Repair & Inflation Wallet has everything you need to repair a flat tire, packed in a wallet that fits in a jersey pocket. No seat bag required. After patching your damaged tube, inflation is a breeze. Twist-to-inflate technology makes this easy to use. Fully controllable, just thread a cartridge onto the CO2 bicycle tire inflator, tighten until the cartridge is pierced, press the nozzle onto the valve, then twist the cartridge to release the gas into the tire. Takes only seconds to fill your tire and be back on the road. • Includes Microflate Nano CO2 inflator • Includes two 16 gram threaded CO2 cartridges • Includes one small patch kit & two tire levers • All packaged in a 3.5 x 4.5-inch nylon zippered wallet • Works with both Presta and Schrader valves • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (each sold separately) • Construction: Glass reinforced nylon with brass internals. • Weight: 23 grams
Local/Central Universal Light Mount replacement strap. Compatible with: - Central 100 Front Light - Central 20 Rear Light - Local 75 Front Light - Local 50 Front Light - Local 20 Rear Light - Local 15 Rear Light - Local 10 Rear Light
For all of the following models: - Carbon Drive Lite - Pressure Drive - Pressure Carbon Drive - Tech Drive HP - HP Drive - Sport Drive HP - Micro Floor Drive HP - Micro Floor Drive HPG - Swivel Drive HP
- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps - Sold as a pair
$9.99 - $11.49
Bringing Lezyne's Metal Kit along is the difference between being stranded and making it home. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a waterproof aluminum box that fits neatly in a seat bag, jersey pocket or hydration pack.
$17.99 - $18.39
Replacement CNC-machined aluminum pump mount for all Road Drive and Carbon Road Drive pumps. Includes Velcro pump strap.
Rebuild seal kit for the Lezyne HP Floor Drives (CNC, Alloy, Classic, Steel, Sport). Kit includes a replacement swivel and a piston seal o-ring.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.
Flats Beware What’s better than one plug? Two plugs. And why not add a P/V core tool since you’ll have to re-tubeless-ify an ailing tire anyway? The Pro Plugger expands on the success of the original Plugger - known for its double-wrapped plugs to seal real-world marring - and adds CNC alloy construction, an even more compact and convenient design, and still packs 5 refills into its pared-down and minimalist physique. Elegant? Of course. Smart? Indeed. Quickly accessible? Why yes - faster than bear spray. - 10 Plugs, Presta valve core tool, strap for top tube or seatpost
A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
New design in full metal with longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the SmartHead DX pump head includes extra long and mounting hardware. - Head: Full metal SmartHead DX1-Fits Presta/Schrader - Material: Aluminum head Rubber hose - Pressure Tuning: Air release button - Size: 8.3 x 5 x 2.6 cm / 3.3” x 2” x 1” (head)-110 cm (hose length) - Weight: 91 grams
2 in 1 design! This unique product works like a mini air compressor that allows any floor pump to compress air into the 1000cc aluminum air tank. Then, it quickly releases a high volume of air to mount tubeless tire beads. The aluminum TubiBooster head also works as a CO2 inflator, compatible with Topeak threaded 16g/25g CO2 cartridges. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves, Push to inflate - Air Tank: One liter, Store up to 200psi / 14bar air pressure (varies with the pump capacity) - Working Pressure - 1800psi / 124bar - Compatible with Topeak threaded 16g / 25g CO2 cartridges - Material: Aluminum
Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.
350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.
Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.
- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool
- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.
220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.
Page 1 of 2 Next page