Parts & Accessories
$19.99 $39.99 50% Off
The Specialized Body Geometry SL Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot.
$20.00 - $21.00
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. - Includes heel, ball, and toe pieces - Includes toe spikes - Sold in pairs; includes screws
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
$16.00 - $20.00
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Page 1 of 1