Make the most of your space with Saris' Bike Bunk. It stores two bikes and adjusts to fit different bike styles and sizes. This free-standing mount features grippy, cushioned contact points that protect your floor and wall.
Keep your garage organized or maximize your living space with Saris’ Bike Trac. A wide wheel track accepts most front and rear bike wheels, plus it's long enough to keep your bike securely in place and your walls protected. Mounting hardware is included.
Saris' CycleGlide 2-Bike Add-On kit lets you hang two more bikes on your Saris CycleGlide overhead storage rack (sold separately).
Garage floor space is precious. Saris’ CycleGlide offers an ingenious and elegant space-saving solution. You can store up to four bikes of virtually any size and shape thanks to its adjustable hooks. The gliding rails maximize storage room and allow easy access when you want to take a bike down to ride.
Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). • The ES-1 adjusts from 94 to 120cm (37"-47") • Horizontal width (inside to inside): 2.23 meters (87")
This three-bike stand from Swagman provides an easy way to keep your bikes up and off the floor. The freestanding support holds bikes at the wheel and accommodates all styles of bike. The stand is made of heavy-duty steel tubing and offers a snap-together design that allows you to use the stand for one, two, or three bikes. The stand weighs 8.5 pounds and measures 14 by 46 by 14 inches (WxLxH) fully assembled. - Three bike stand - Accomodates all styles of bike - Easy to load - Expandible in multiples of three - Snap-together design
Thule's free standing Bike Stacker stores bikes out of the way in your home, apartment, and garage. Constructed of strong steel, it will hold the heaviest bikes without fail, and its arms are independently adjustable for maximum convenience.
Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.
Bandit SWAT MTB storage strap. - Uniquely designed to bolt directly under a saddle with SWAT compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge for compact and secure storage. - Tough, lightweight, water resistant Velcro strap. - Tube, CO2 cartridge, and nozzle not included.
• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated
• For quick and simple parking or displaying of your bike • Durable and rigid design • Fits any model of bike with 26-inch wheels • Color: Silver 26
Topeak's Third Hook is the perfect addition to your TwoUp TuneUp storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!
• For quick and simple parking or displaying of your bike • Durable and rigid design • Fits any model of bike with 700c or 29-inch wheels • Color: Black
Topeak's Handlebar Stabilizer is a useful addition to your Dual-Touch storage rack as it securely holds your front wheel and bar, making it easier than ever to work on your bike.
Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length
Tacx's Gem Bikebracket is a stylish, easy and space-saving way to display your bicycle on any wall. Its two durable plastic arms hold bicycles weighing up to 55 pounds in the safe rubber-lined holders built into the ends of the arms. The Gem's modern design complements any room of your house and you can simply click off the arms when it's not holding a bike so that you don't bump into the rack walking past it. On the inside of the Gem is a hook for hanging a helmet or clothing, too.
Tacx's Gem Bikestand is a simple-to-use, sturdy and safe bicycle parking and display stand for your road and mountain bikes. Instead of just leaning your valuable bicycles against the wall where they can fall over, use the Gem. It has 2 plastic hooks that hold your bike by the rear stays and a wide, stable and sturdy base to keep your bike upright, safe and secure. And, because the rear wheel is held off the ground you can also perform minor bike adjustments. For these reasons, lots of professional cycling teams use Gems for parking their racing bikes.
• Holds and highlights one bike up to 30 lbs • Enhanced with European beech wood and soft cork • Remote-controlled, battery-operated LED light shines down on your bike
The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.
The Saris Locking Bike Trac is a heavy-duty wall-mount bike rack that makes parking and displaying your bike simple. Plus, it even offers a 3/4-inch solid-steel locking loop that allows securing your bike with a U-lock (sold separately).
Don't get too hung up on bike storage. Swagman's Hook It delivers an incredibly easy, simple way to organize bikes and make more space at the same time. Big hook design fits even the biggest wheels and tires. -Heavy duty steel hook is both attractive and easy to use -Includes 4 mounting screws -Fits all tire and rim sizes
The Thule RoundTrip Pro Storage Sleeve is a soft storage sleeve to keep the contents of your RoundTrip Pro bike case tidy when not in use.
• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs
- Oversize hooks for large MTB tires and tall aero rims - Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend - 50mm (2") of machine threading with a thread size of 10mm x 1.5mm - Black vinyl coated - Includes two nuts
Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service • 470XX Machine thread including two nuts: • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")
Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")
Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.
Topeak's Third Hook is the perfect addition to your Dual-Touch storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!
- Easily holds a bike, kayak, or ladder - Efficient pulley system helps you lift and lower heavier objects - Auto-locking mechanism prevents accidental release - Engineered for durability with tough silver powder coat finish - Includes mounting hardware and full instructions - Maximum load: 50lbs
The EVOC ROAD BIKE ALUMINIUM STAND is the perfect solution when it comes to fastening your triathlon/road/race bike in EVOC's BIKE TRAVEL BAG and BIKE TRAVEL BAG PRO. - Fixation for fork drop out (QR 5mm x 100mm) and rear drop out (QR 5mm x 130mm) - Length adjustment (infinitely) - Height adjustment (3 step) - Minimum pack size - Maximum wheel base: 113 cm - Not to be used in combination with fork protector
Page 1 of 2 Next page